COMOSYSTEMS – FAQ

Most of us don’t directly feel the physical impact when electromagnetic radiation passes through our body. In January 2019, over 250 scientists from around the world submitted a petition* (revised from the original petition introduced in 2015) which calls for greater protection against electromagnetic radiation in the environment, and comments:

“Based on published, peer-reviewed research, we have serious concerns about ubiquitous and increasing exposure to electromagnetic fields generated by electrical and wireless devices,” they wrote.

“Numerous recent scientific publications have shown that electromagnetic fields affect living organisms at levels well below the standards of most international and national guidelines. Effects include increased risk of cancer, cellular stress, increased levels of harmful free radicals, genetic damage, structural and functional changes in the reproductive system, learning and memory deficits, neurological disorders, and negative impacts on general human well-being.”

*https://www.emfscientist.org/index.php/emf-scientist-appeal

Safety levels are based on the outdated belief that, to cause biological effects, electromagnetic fields must have a thermal effect (i.e. a heating effect).
This belief formed the basis of the SAR scale, which is still used to determine safety levels. Industry-funded research is used to justify the continued expansion of electromagnetic field use, while independent research provides ample evidence of the dangers.
It has been proven beyond doubt that electromagnetic fields do not need to cause a thermal effect to alter our biology, even if the industry denies it.

A CMO device is stimulated by the electromagnetic radiation that strikes it to generate a compensation signal that reinforces the correct biological frequencies in the cells within range. This reinforcement signal prevents electromagnetic pollution from interfering with and disrupting our normal biological processes.

Find out more about biological and physical functioning here: YYYYY

Homeostasis is the definition of a balanced state of ions inside and outside our cells. Homeostasis is clearly disrupted by exposure to EMFs: the main effect of CMO technology is to restore homeostasis, in particular by re-establishing proper balances of intracellular ion concentrations; it should be noted that an excess of calcium (or magnesium, or any mineral) can generate a cascade of biological stresses leading to eventual pathological states.

The CMO is a passive system, meaning it uses the electromagnetic field of the environment to operate. When the CMO is placed in the polluting electromagnetic field (telephone, Wi-Fi, relay antenna, etc.), by resonance effect the CMO will generate a micro-signal: this is the compensation signal.
By analogy (another example of a passive system), when a neon tube is placed under a high-voltage line, the tube will resonate at the 50 Hz frequency of the field generated by the power line, and light up.
The compensating signal generated by the CMO does not constitute additional pollution: the level of intensity (power) of the signal emitted by the CMO is of the same order of magnitude as the magnetic field emitted by the brain: 150 femtoTesla, i.e. hyperweak. This signal is designed to compensate for the biological effects of electromagnetic waves, enabling the body’s cells to exchange information in a normal, natural way, despite the presence of artificial electromagnetic radiation: it’s a regulator of homeostasis. Contrary to popular belief, CMO does not absorb or displace waves! The CMO simply compensates for the biological effects caused by electromagnetic waves.

For those who wish to deepen their knowledge and understand the scientific basis of CMO operation, please refer to the text:

“THE PHYSICS PRINCIPLES OF CMO TECHNOLOGY”

This text, co-written by Prof. Marc Henry and Dr. René Messagier, provides a detailed scientific explanation of the quantum and biological theory behind CMO operation.

You can find the text here: YYYYYY

Over 10 years of research by independent scientists have proven that CMO devices mitigate adverse effects. This research (some of it double-blind placebo-controlled) has been conducted in relation to several stress markers in humans, as well as in various animal species. Over 20 biological, neurophysiological and psychophysiological parameters have been measured and shown to be altered when exposed to artificial electromagnetic fields from cell phones, computers or Wi-Fi. It was also clearly demonstrated and measured that all disturbed biological parameters had returned to a healthy, balanced level.
A video study of ant behavior was carried out at the University of Brussels (Belgium) by a renowned expert in the field. Insects are a very good subject for experimentation, as their biological systems react to negative events in the environment. The results of the experiment leave no room for debate about the effect of a Wi-Fi router on ant behavior, and there is a spectacular demonstration of the compensatory effect of CMO (when the ants “come back to life” a few minutes after CMO protection: see the video on our site

Review address: https://www.comosystems.com/fr/content/78-video-fourmis

There are also many testimonials from people all over the world who have benefited from CMO technology. The first devices with CMO technology were built 25 years ago and are still fully functional today, according to in-house research.

The biological validation of CMO technology is proof of its effectiveness: the result of ten years of biological experiments carried out in independent university laboratories and hospitals. CMO products also come with a 4-week money-back guarantee.

CMOs are designed for frequencies up to 60 GHz. Current 5G uses around 3.5 GHz, so yes, CMOs are suitable for 5G of course!

Fiber transports the same information (almost) as the copper wire in a telephone, except that the data is carried by light rather than electrical currents. Fiber itself does not emit electromagnetic waves. The question is “how is Internet access achieved from the box to the computer?

if the connection is via RJ45 cable (and this is obviously the best solution in all cases), fiber is only beneficial, since it offers higher throughput without any additional drawbacks (as far as we know).

but if it’s done by Wi-Fi, as there’s a lot more data passing through, and the toxicity of Wi-Fi depends strongly on the amount of data being transferred, fiber will indirectly increase the toxicity of Wi-Fi.

So don’t worry about the fiber itself but it is preferable to use a RJ45 connection to connect the internet router to your computer!

If using Wi-Fi, then the MF04 CMO is ideal

One might legitimately think that, since the CMO is made of aluminum on the outside, it would act as a Faraday cage for the active solution inside, so that no waves could pass through it from either side. The reality is more complex. Non-magnetic materials such as copper or aluminum have no effect on low-frequency magnetic fields. In other words, aluminum doesn’t stop ELF.
https://www.researchgate.net/post/What-is-the-material-that-can-be-used-to-shield-EMI-within-50-60-Hz
Below 1000 Hz (1kHz), aluminum doesn’t attenuate the passage of EMF at all. (in theory AND in experiment)
Note that the CMO compensation signal is a magnetic signal (detected by SQUID): the frequencies emitted by the CMO solution are in the range below 100 Hz, which are also used by our cellular and organic communication systems.
In other words, the Faraday cage principle does not apply to the frequencies used by CMOs.

One might legitimately think that the CMO compensation signal, being around a million times weaker than the signals generated by Wi-Fi boxes, computers, cell phones and other electromagnetic pollution, would be completely drowned out by the ambient background noise, and therefore incapable of being perceived by living organisms.
Biological results show that, despite these extreme conditions, CMOs have a validated efficacy.
The explanation of how CMOs act on biological receptors is supported by the concept of stochastic resonance. This is the only physical principle currently known to explain the influence of a hyperweak field on a non-linear receptor system.

Further information :

https://femto-physique.fr/simulations/resonance-stochastique.php

https://pubmed.ncbi.nlm.nih.gov/29026142

The main publications are available online at the following link:

XXXXXXXX

These are scientific texts, indicating research protocols, results, conclusions, statistical analyses, etc.

SAR quantifies the short-term thermal effects caused by electromagnetic waves. SAR is perfectly suited to the risk of electric shock or burns, but does not take into account long-term biological effects. For the record, the SAR applied to cell phones is derived from the following measurement: a receptacle (equivalent to a human head) is filled with a liquid (such as saline solution); a thermometer is immersed in this liquid; this volume is exposed to the cell phone to be tested, over a period equivalent to 6 minutes. If the temperature “rises too high” (a few tenths of a degree), then the phone is considered too powerful. Otherwise, “no worries”! These calculations are detailed in the ICNIRP (International Commission on Non-Ionizing Radiation Protection) “Guide to the Establishment of Exposure Limits to Electric, Magnetic and Electromagnetic Fields”. But even the ICNIRP acknowledges (page 25) that “(…) measurement results seem to indicate the existence of a positive association between magnetic fields and leukemia risk (…)”, and that (page 31): “In monkeys, degradation of thermoregulatory behavior begins as soon as the temperature of the hypothalamic region increases by 0.2 – 0.3°C [Adair et al., 1984]. Generally speaking, only biological measurements can be used to demonstrate the effectiveness of biological protection. However, SAR is based on calculations and physical measurements of inert solutions, not on biological measurements. CMO validation studies, on the other hand, are based on biological measurements.

Dr. J. Monro has shown that when a tube of water is exposed to an electromagnetic field, it is capable of returning an electromagnetic signal (albeit at a very low level): this is the origin of water “structuring”. Many people know how to structure water, but this structuring (i.e., this water “memory”) will be effective for 1 month, 2 months at most. What’s more, this structuring will be lost if another transmitter is placed next to this tube: the water will then be structured according to this new source.
Inside the CMO is a small tube (in the case of cones, a sphere), which contains not water, but a microcrystalline solution: this is the active solution. What’s important is the electromagnetic signal generated by the CMO. The specificity of CMOs lies not only in their ability to structure the active solution, but above all in their ability to maintain this active solution over time, even when exposed to other electromagnetic fields. In-house tests have shown that the CMO’s compensation signal will persist, even after 20 years. The operating principle of this active solution is similar to that of water memory and/or homeopathy, as described in the film “On a retrouvé la mémoire de l’eau”, starring Profs Luc Montagnier and Marc Henry.

Since 2017 the packaging has changed to a more ecological version. CMOs are now protected in boxes using a fully biodegradable material: derived from corn waste (it’s waste, there are no corn crops), these recycled products can be put directly in the ground (for example in your window box, in flower pots, or in the soil of your garden): after three weeks, the material will be completely biodegraded.

Unfortunately, at the beginning of 2025, the manufacturer ceased production of this material and we had to choose a recycled polystyrene which is itself recyclable, which limits, without being perfect, the ecological impact of this packaging.

New solutions are currently being studied to replace the previous biodegradable material.

Cardboard and inks are also biodegradable.

No, absolutely not. The signal strength emitted by the CMO is hyperweak (about a million times weaker than the signal strength emitted by a cell phone). This compensation signal has no influence on the electronics of the devices. In particular, the SAR will not be affected.

There are 2 possibilities: if you are experiencing a problem caused by electromagnetic waves (sleep problems, irritability, sensation of a burning ear, etc.), you will “very probably” find that this disorder will be corrected by the CMO. If you are looking for prevention and have no particular symptoms, you can rely on the results of biological studies carried out on the test subjects: every time, the biological parameters that were disturbed by electromagnetic waves return to normal values with a CMO (production of antibodies, production of ACTH, production of melatonin, etc.).

To the best of our knowledge, no biological studies have been carried out on these products, so it’s not possible to conclude whether they work or not.

To find out how to choose protection that is truly effective and scientifically validated, we recommend that you refer to the Buyer’s Guide, which can be found on our website here : Adresse buyers’s guide YYYYYY

CMOs are made in France. From manufacturing to logistics, everything is based in France, in Bourgogne Franche-Comté. Only the head office (the administrative part) is based in Spain.

For cell phones, tablets, cordless phone handsets, GPS, baby phones: the MP24.

For computers (fixed or portable) and TV sets: the PC16.

For individuals on the go: TR26

For your home (house, apartment): the best choice is the MF04,
placed in the center of the house for protection for all bodies up to
100m².

To give you the best possible guarantee, we offer a 4-week “money back guarantee” on all our products. In other words, we’ll give you your money back if you return the product (in good condition, of course) within 4 weeks of your purchase. This has been part of the Comosystems ethos for 20 years now. The return rate is very low, as we know that CMOs are effective. This guarantee simply puts your mind at rest.

The effect is usually immediate. But in some cases, it can take a week or even 2 for the biological balance (homeostasis) to be re-established.

No; the power level of the compensating signal emitted by the CMO is equivalent to what is naturally emitted by the brain, so it’s very, very low. It’s still enough to be biologically active, as studies have shown, but it’s not additional pollution.

Each CMO is specific: when you have an MP24 on your phone, a CMO-PC16 on your computer as well as on your TV, a CMO-MF04 for your home (and possibly a CMO-TR26 for your travels: you already have excellent protection.

Yes, collective CMOs (MF04, MF05, etc.) will generate a protective bubble over a diameter of 11 meters (i.e. the equivalent of 100 m² or 200 m² of floor space); walls do not stop the CMO’s compensation signal.
The main living areas should be inside this bubble.

The MF04 Multi-Function Cone is designed to compensate for the biological effects of “communication” electromagnetic waves (Wifi, Bluetooth, base stations, 4G, power grids, etc.). However, this Multi- Function cone does not take into account frequencies emitted by the “internal electronics” of personal devices (computers, cell phones or televisions). We therefore recommend a specific CMO for your telephone (MP24), computer and/or TV set (PC16), in addition to the cone for our home (as does the TR26 Traveller, since the CMO-MF04 and TR26 have the same applications).

Yes, see question above.

The CMO MP24 is generally used glued to the back of the equipment (on the phone or on the protective shell) using the adhesive supplied for this purpose.
But you can also use it unglued if, for example, your phone has a silicone protective shell. The flexibility of silicone means you can slide the CMO MP24 under the protection, enabling you to move it easily from a phone to a tablet, for example.
There are no recommendations for the placement of the CMO MP24: it can be placed at the top or bottom of the equipment. Placing it in the middle is not recommended, for the simple reason that the slightly convex shape of the CMO MP24 could cause your phone to “tip over” when placed on a table… which is not comfortable when using the phone to enter a text message, for example.
The same applies to the CMO PC16; you can use it glued or unglued to the equipment.

If you change the phone or computer on which you have a CMO stuck, please refer to the tab on this page “I’m changing phones (or computers); can I keep the same CMO?

Yes, absolutely: the CMO is a passive system. Using the example of the neon tube placed under the high-voltage line, the tube will illuminate in the same way whether it’s under the line or right next to it. However, the further away it is, the less light it will give. The same applies to the CMO, which should be placed as close as possible to the source of pollution: on the device itself, or on its protective shell (tablet, GPS, telephone, etc.). It doesn’t matter where it’s positioned on the device.ment.

By definition, the CMO MF04 should be placed in the center of the home. If there is an upper floor, the CMO MF04 should be placed on a high piece of furniture, on a shelf or even in a cupboard on the ground floor, but always in the center, so that the compensation bubble covers the living areas upstairs and downstairs.

Yes, it’s advisable and even useful that your CMOs are also part of the trip!
To pass through airport security checks, for example, you’ll need to place your CMO TR26, along with your keys, cell phone (equipped with the CMO MP24) and other metal objects, in the bins that pass under the security gates. Once the checks have been completed, you can retrieve your personal belongings, including your CMOs.
For MF04 or MF05 models, we advise you to put them in your suitcase, which will remain in the hold of the aircraft during the journey.

Yes, and there are several ways to use the CMO-TR26: during the day, you can use it with the supplied attachment system. You can hang it on the belt loop of your pants, with your keys, on your handbag, schoolbag or backpack. You can also put it next to you on the desk where you work, or in one of the many pockets of a handbag, satchel or backpack, or simply in a trouser pocket. At night, you can place it on your bedside table.
Important information for installing the fastening system (please respect the order): The attachment system consists of two parts: a metal buckle and a snap hook. The metal loop must be threaded through the hole in the TR26. The carabiner part is used to attach the system to a belt loop, purse strap or doc bag, for example.
Please note: the carabiner is not designed to be used in place of the metal buckle, as this could break it. Any damage to the carabiner resulting from such misuse will not be covered by the warranty.

The most suitable CMO is the TR26, which will take into account the “data transmission” part of the waves (wifi, bluetooth, 3G, 4G), from your phone and also from the phones of the people around you. Only the “internal electronics” of your phone and your neighbor’s phone will not be taken into account.

Yes, passing through the security gates will not alter the CMO’s active solution. Before passing through the gates, you can place your CMO in the bin, along with your keys, cell phone or any other metal object.

Yes, passing through the security gates will not alter the CMO’s active solution. Before passing through the gates, you can place your CMO in the bin, along with your keys, cell phone or any other metal object.

When you receive your MP24 or PC16 CMO, you’ll notice a plastic film on the domed surface. This thin film is a protective element that was added to prevent scratches to the surface of the CMO at the time of manufacture. It has no effect on CMO operation. This film can be left on or removed.

​​This will have no effect on the CMO’s active solution, which is well protected inside each CMO. So, should an unfortunate fall scratch the outside or dull the tip, the CMO will continue to function.

​​CMOs restore to normal biological parameters disturbed by electromagnetic waves.
As the signal intensity of a CMO is a million times lower than that of a cell phone or electronic device, it cannot physically interact with or modify the electronic part of a device.

​​The first CMOs were designed in the 1990s, so this technology has 30 years’ hindsight: the active solution is stable. As long as there are no major technological developments, there is no need to change the CMO. However, the CMO’s compensation signal is determined according to the electromagnetic field to be compensated; if the transmitting technology evolves, it will be necessary to check and possibly adapt the CMO. For example, CMOs have been restructured with the arrival of Smartphones. In the case of 4G, the verification was carried out (at ), and we found that the CMOs were fully adapted, with no need for restructuring. The guaranteed (“administrative”) build lifespan is 2 years, but the actual compensating signal lifespan is much longer: it remains unknown to this day. So there’s no need to change your CMO every 2 years!

​​CMOs are highly technical products, and each active solution is structured according to the frequencies to be corrected. A great deal of progress has already been made, since initially there was one cone for wifi, another for relay antennas, and so on. Now a single cone groups together the 4 basic cones (it’s the MF04). Technically, we can’t yet structure a single active solution for all applications.

​​Some natural elements (e.g. stones, ceramics) tend to become “charged”, and would require regular exposure to sunlight, immersion in salt water or other actions. In the case of CMOs, however, this approach is not useful, as the products do not “charge”; nor is it recommended, as this would risk impairing the proper functioning of the CMO (corrosion with salt water, degradation of the active solution if exposed to excessive heat).

​​Yes, it’s still effective. The active solution is protected by the metal casing.

​​The CMO’s active ingredient is housed in a small tube which must contain a certain quantity of liquid, and which must be placed inside the CMO. CMOs are technical products, and efficiency must come first. However, the thickness is still very acceptable, as the CMO-MP24 can be attached to the phone’s case, for example.

​​The CMO is sensitive to extreme temperatures: do not expose it to temperatures above 65°, as this will cause irreversible damage to the active solution. Be particularly careful if you forget to remove a TRAVELLER CMO (TR 26) from the pocket of cotton pants before putting it in the washing machine, or in the sun in the car in summer.
If exposed to sub-zero temperatures, the CMO’s saline solution will freeze, thus inactivating the CMO, but only temporarily: once thawed having returned to positive temperatures, the CMO will regain all its normal protective characteristics.